Roller Inspection
Rollers and Regulation 6
A vibrating roller is work equipment and mobile plant under PUWER 1998. Regulation 6 puts it on a suitable-interval inspection by a competent person, covering the drum, vibration unit, brakes, steering and operator protection.
Our Engineer Surveyors inspect yours on site and set out what they find.
Roller PUWER
Regulation
PUWER 1998
Inspection interval
Risk-based
Common baseline
At least annual
Examined
On site
Report turnaround
Within 3 days
What's included
What's covered in a roller inspection
Drum and Vibration
We check the drum or drums and their mountings for cracks and damage, and the vibration or exciter mechanism with its isolation mounts. These take constant pounding, so wear here shows up fast.
Steering and Articulation
We inspect the articulation joint and steering for wear and play. A worn articulation pivot causing steering play is one of the faults we most often report.
Brakes
We test the service and parking brakes that hold the machine on a slope. Brake wear is a common and serious finding on compaction plant.
Hydraulics
We check the hydraulic system, hoses and rams for leaks across the lift, drive and steer circuits. Hydraulic leaks are among the issues we see most.
Operator Protection and Controls
We examine the ROPS or FOPS and the operator restraint or seatbelt, then the controls, horn, lights and reversing alarm. Damaged or modified ROPS and a faulty reversing alarm are defects we flag at once.
How it works
Your roller's PUWER inspection, start to finish
Every scheme your equipment is required to meet under UK regulation carried out by accredited engineers and backed by compliant reports.
1
Book
Tell us the roller and your site, and we confirm a date and a fixed quote, usually same day.
2
On-site examination
A competent Engineer Surveyor attends and inspects the machine against PUWER Regulation 6.
3
Compliant report
You receive an inspection report within three days, with any defects and timescales set out.
4
Reminders
We track the due date and remind you before the next inspection falls due.
OUR STANDARDS
Plant inspections where safety comes first
We take our responsibilities seriously, upholding the highest standards of professionalism, quality and safety across every aspect of our operations.
Quality Assurance
Accurate, dependable inspections from highly trained Engineer Surveyors who keep current with industry best practice.
Responsibility
A rigorous process that manages risk and keeps your plant compliant with PUWER and the wider regulatory framework.
Care
Safety runs through everything we do. We care about the people around your machines, and our standards bring real peace of mind.
GET IN TOUCH
Request a Roller Inspection
Tell us what needs inspecting and when, and we'll confirm availability and a competitive quote, usually the same day.
Call us
0208 050 3958
Based in
Reading, Berkshire: serving the South of England
● Hampshire
● Oxfordshire
● Northamptonshire
● Cambridgeshire
● Surrey
● Buckinghamshire
● London
FAQ
Roller Inspections: What People Ask
How often does a roller need a PUWER inspection?
There is no set PUWER frequency. Regulation 6 calls for inspection at intervals matched to how hard the roller works and the conditions on site, plus after exceptional events. For plant of this kind that usually means at least once a year.
Do you carry out inspections on site?
Yes. Our Engineer Surveyors come to your premises across Berkshire and the surrounding counties, and we issue reports promptly.
Is the operator protection part of the inspection?
Yes. The ROPS and operator restraint are central to a roller inspection, alongside the brakes, steering and hydraulics, because an overturn is the main risk with compaction plant.
What happens if equipment fails the inspection?
Your report sets out every defect and how serious it is. Anything that poses an immediate danger is flagged at once, so the equipment can be taken out of use until it is put right.
What's the difference between PUWER and LOLER?
PUWER applies to all work equipment, which must be suitable, maintained and inspected as the risk requires. LOLER adds extra duties for equipment that lifts. Anything that lifts may need both, while the equipment on this page falls under PUWER.